FillFoam Installation Systems

Standard FillFoam Systems

Illustration

Benefits

● Easy to use on limited-access or indoor projects.
● Great insulation properties and sound barrier.
● FillFoam is very light compared to alternatives
● No minimum load requirements (Redimix/Concrete) or pumping equipment rentals

These units contain the following:

    Pumping Capacity – up to 12 cubic yards per hour
    Pumping Distance Capability– Up to 200 feet
    Supply Hose – 100 ft heated hose
    Up to 100 ft of pumping hose
    System Requirements:
    -Air‐Min 14 CFM at 145 PSI
    -Power‐min 20 amps for heated hose and drum blankets
More InformationContact Us

Hi‐Volume FillFoam Systems

Benefits

● Easy to use on limited-access or indoor projects.● Great insulation properties and sound barrier.● FillFoam is very light compared to alternatives● No minimum load requirements (Redimix/Concrete) or pumping equipment rentals

These units contain the following:

    Pumping Capacity – over 60 cubic yards per hour
    23.5 cubic yards per hour per mixing Equipment
    Pumping Distance Capabilities – Potentially Miles
    Supply Hoses 25 ft sections
    Pumping Hoses 25 ft sections
    Operate up to 3 mixing cylinders per unit
    *Additional air requirements apply.
    System Requirements
    -Air‐Min 185 CFM at 145 PSI / Mixing Equipment
    -Power‐For Heated Blankets if necessary
More InformationContact Us

Please note that FillFoam is not considered a Poly Unit as FillFoam requires a different rig to prepare, store, deliver and install the FillFoam material. You can, however, add FillFoam to your existing equipment setup.

WHAT IS FILLFOAM™?

FILLFOAM™ is a pre-expanded open-cell foam formulated with ideal characteristics for any void-filling applications. Pumped at full volume fill foam does not lose volume when pumped in confinement. 

Illustration

Please call, we would be happy to assist you with your custom unit.

FillFoam is perfect for Void Filling - Fill ANY Void. Without the bi-product of heat, FillFoam is a safe and fast way to fill voids and cavities quickly and with limited access. Unlike Polyurethane that is ‘blown’ with a chemical reaction via water or gas, FillFoam is air blown and then the cells are hardened.

These units contain the following

    No Heat is created during installation
    Safe to install at any rate or quantity
    Can absorb water from overburdened soils
    Immune to seasonal changes
    Hydro-Insensitive / UV-Insensitive
    Variable Densities of 10-50 PSI on site/same material (12 – 60 Cubic yards per hour depending on equipment)
    Highly Flowable over 500 ft
    Lightweight & Strong
    FillFoam can be re-excavated if necessary
More InformationContact Us